Справочник Пользователя для Oregon Scientific DV33

    3

The 

 operates on 3 “AA” size 

batteries or a 6V AC/DC adaptor (not included).

1.  Make sure the unit is turned off.

2.  Open the battery cover at the back of the unit 

using a coin or a straight blade screwdriver.

3.  Insert 3 “AA” size batteries.(Note the correct 

polarity: +, - ).

4.  Replace the cover.

Please turn off the unit before plugging in the 

AC/DC adaptor to prevent damage to the unit. 

Plug the adaptor into the adaptor jack (center 

positive type) located on the right hand side of 

the unit. Plug the adaptor into a wall outlet.

•   Do not mix different types of batteries or old and new 

  batteries together.

•   Only use batteries of the same or equivalent type as 

  recommended.

•   Remove all batteries when replacing.

•   Remove batteries if the unit is not going to be used for 

long periods of time.

•   Do not dispose of batteries in fire.

•   Do not recharge non-rechargeable batteries.

•   Rechargeable batteries are to be removed from the toy 

before being charged.

•   Rechargeable batteries are only to be charged under adult 

supervision.

•   Remove exhausted batteries from the toy.

•   Do not short-circuit the supply terminals.

•   The unit must not be connected to a power supply greater 

than 6V.

•   Only use the recommended adaptor.

•   The adaptor is not a toy.

•   Do not short-circuit the supply terminals.

•   Toys liable to be cleaned with liquid are to be

  disconnected from the power source before cleaning.

•   Due to AC/DC adaptor connection this product is not 

suitable for children under 3 years to use without adult 

supervision. 

•   Any safety isolating adaptor to be used with the toy 

  should be regularly examined for potential hazard, such 

as damage to the cable or cord, plug, or enclosure of other 

parts. In the event of such damage, the toy must not be 

used until the damage has been properly removed.