Справочник Пользователя для Golden Technologies GB 104

Buzzaround Owner’s Manual - 

 

Page 12

 
When the power to your Buzzaround

™ is turned on, an LED (Light Emitting 

Diode) will illuminate.  This LED is used in diagnosing operational problems that 
may arise.  See “Diagnostics” section on page 19.  
 
Horn Button 
Press this button to sound the horn. 
 
Thumb Lever Control 
This self-centering thumb lever system controls your Buzzaround speed (up to 
the maximum speed set by the speed adjustment dial) as well as the forward and 
reverse direction.  This control system is also called the “Wig-wag”.  
 
To drive forward: 

•  Place your hands on the handgrips. 

•  Use your thumbs to operate the control lever. 

•  User your right thumb to press lightly on the “F” (forward motion) lever to 

move your scooter forward. 

•  Increase the pressure applied by your thumb to increase your forward 

speed. 

•  To stop your Buzzaround, release all pressure on the lever.  The lever will 

automatically return to the center (neutral) position and your scooter will 
come to a gradual stop. 

 
Note:  Always bring your Buzzaround to a full stop before changing direction from 
forward to reverse, or from reverse to forward. 
 
To drive in reverse: 

•  Place your hands on the handgrips. 

•  Use your thumbs to operate the control levers. 

•  Use your left thumb to press lightly on the “R” (reverse motion) lever to 

move your scooter in reverse. 

•  Increase the pressure applied by your thumb to increase your reverse 

speed. 

•  To stop your Buzzaround, release all pressure on the lever.  The lever will 

automatically return to the center (neutral) position and your scooter will 
come to a gradual stop.