Справочник Пользователя для Mitsubishi Electronics AJ61QBT11
7 - 22
7 DATA LINK PROCEDURE
MELSEC-QnA
Continued from the previous page
End
The test results are displayed on the "LEDs" of master module.
PRM
none
• Test cannot start. (Cable is disconnected before the test,
or power is off at all stations.)
or power is off at all stations.)
• Cable is disconnected, or the corresponding station has
error.
• Test transmission text is corrupt.
error.
• Test transmission text is corrupt.
[When normal]
The LEDs are turned on in the following order: "SW" "M/S" "PRM" "TIME".
It is judged as normal when this repeats five times or more.
The LEDs are turned on in the following order: "SW" "M/S" "PRM" "TIME".
It is judged as normal when this repeats five times or more.
SW
M/S
PRM
TIME
M/S
PRM
TIME
LED on
Cause
[When error]
Repeats
SW00B8
Error code storage area