Справочник Пользователя для Mitsubishi Electronics QnUCPU

9.12 Other Devices

9.12.1 SFC block device (BL)

The SFC block is used to check that the specified block in the SFC program is activated.

Remark

For use of the SFC block device, refer to the following.

QCPU (Q Mode)/QnACPU Programming Manual (SFC)

9.12.2 Network No. specification device (J)

(1) Definition

The network No. specification device is used to specify the network number in the link dedicated instructions.

(2) Specification method

In the link dedicated instruction, this device is specified as shown in Figure 9.92.

Remark

For details of the link dedicated instructions, refer to the following.

Reference manual for each network module

Figure 9.92 How to use the network No. specification device

JP.READ

S1 S2 S3 D

Instruction name

Network No. specification instruction

Network No. specification device

(n: network No.)