Справочник Пользователя для Mitsubishi Electronics A1SJ61QBT11
15 - 2
MELSEC-QnA
15 FUNCTIONS (FUNCTION VERSION B OR LATER)
15.2.1 Network parameters
Network parameters are used for performing data link. The items that are set by the
network parameters are shown in Table 15.2.
network parameters are shown in Table 15.2.
Table 15.2 Network parameters
Buffer memory address
Setting item
Description
Hex. Dec.
Number of connected
modules
modules
Sets the number of remote stations, local stations, intelligent device
stations, and standby master station connected to the master station.
(Includes reserved stations.)
stations, and standby master station connected to the master station.
(Includes reserved stations.)
Default value : 64 (modules)
Setting range : 1 to 64 (modules)
Setting range : 1 to 64 (modules)
1
H
1
Number of retries
Sets the number of retries during the communication error.
Default value : 3 (times)
Setting range : 1 to 7 (times)
Setting range : 1 to 7 (times)
2
H
2
Number of automatic return
modules
modules
Sets the number of remote stations, local stations, intelligent device
stations, and standby master station that can be returned by one
link scan.
stations, and standby master station that can be returned by one
link scan.
Default value : 1 (module)
Setting range : 1 to 10 (modules)
Setting range : 1 to 10 (modules)
3
H
3
Standby master station
specification
specification
Specifies the station number of the standby master station.
Default value : 0 (0: No standby master station specified.)
Setting range : 0 to 63 (0: No standby master station specified.)
Setting range : 0 to 63 (0: No standby master station specified.)
4
H
4
Operation specification
when CPU becomes faulty
when CPU becomes faulty
Specifies the data link status when a master station programmable
controller CPU error occurs.
controller CPU error occurs.
Default value : 0 (stop)
Setting range : 0 (stop)
Setting range : 0 (stop)
1 (continue)
6
H
6
Scan mode specification
Specifies the synchronous or asynchronous mode for sequence scan.
Default value : 0 (asynchronous)
Setting range : 0 (asynchronous)
Setting range : 0 (asynchronous)
1 (synchronous)
– –
Delay time setting
Set 0 for the delay time.
8
H
8
Reserved station
specification
specification
Specifies the reserved station.
Default value : 0 (Not set)
Setting range : Turn on the bit corresponding to the station number.
Setting range : Turn on the bit corresponding to the station number.
10
H
to 13
H
16 to 19
Error invalid station
specification
specification
Specifies the error invalid station.
Default value : 0 (Not set)
Setting range : Turn on the bit corresponding to the station number.
Setting range : Turn on the bit corresponding to the station number.
14
H
to 17
H
20 to 23
Station information
Sets the type of the connected remote stations, local stations,
intelligent device station, and standby master station.
intelligent device station, and standby master station.
Default value : 0101
H
(remote I/O station, 1 station occupied, station
number 1) to
0140
0140
H
(remote I/O station, 1 station occupied,
station number 64)
Setting range : See below.
Station type
b15
b8
to
to
b7
to
b0
Occupied
stations
Station No.
1 : 1 station occupied
2 : 2 stations occupied
3 : 3 stations occupied
4 : 4 stations occupied
2 : 2 stations occupied
3 : 3 stations occupied
4 : 4 stations occupied
1 to 64
(01
(01
H
to 40
H
)
b12 b11
0 : Remote I/O station
1 : Remote device station
2 : Intelligent device station
(Local station and standby
master station are included)
1 : Remote device station
2 : Intelligent device station
(Local station and standby
master station are included)
20
H
(first module)
to
5F
H
(64th module)
32 (first module)
to
95 (64th module)