Справочник Пользователя для Mitsubishi Electronics FX3S-MT/ES
7 Installation In Enclosure
60
FX
3S
Series Programmable Controllers
User's Manual - Hardware Edition
7.5 Connecting Methods for Main Unit and Extension Devices
7.5.3
Connecting method B - connection of connector conversion adapter
This subsection explains how to connect the connector conversion adapter to the main unit.
Connection procedure
1
Remove the top cover (A in the right
figure) from the front face of the main unit.
figure) from the front face of the main unit.
2
Connect the connector conversion
adapter (board) to the option connector
adapter (board) to the option connector
(B in the right figure) as shown in the right
figure, and fix it with M3 tapping screws
(C in the right figure) supplied as
accessories of the connector conversion
adapter.
• Tightening torque: 0.3 to 0.6 N•m
Proceed to the step 4 when using the AC power type
main unit.
Proceed to the step 3 when using the DC power type
main unit.
3
Attach the connector cover provided on
the DC power type connector (D in the
the DC power type connector (D in the
right figure) to the AC power type
connector (E in the right figure).
4
Connect the connector conversion adapter (main body) to the connector
(F in the follow figure) provided on the connector conversion adapter (board)
(F in the follow figure) provided on the connector conversion adapter (board)
as shown in the follow figure.
[In the case of AC power type main unit]
[In the case of DC power type main unit]
A
1
B
C
E
D
4
F
4
F