Справочник Пользователя для HP (Hewlett-Packard) ep7100 Series

1. Press the power button on the projector or remote control to turn off the 

projector. Do not hold the button down.

The power button blinks during the cool-down period, then the projector 
turns off. Even though the projector is off, it uses a small amount of power 
internally.

2. If you want, disconnect video and audio equipment from the projector during 

the cool-down period or after the power button stops blinking.

Ä

CAUTION: Do not disconnect power until the projector has cooled down (the fan stops) 
and the power button stops blinking. Otherwise, you might shorten the life of the lamp.

3. If you must unplug or remove the projector, wait until the power light stops 

blinking, then unplug the power cord.

If you try to turn on the projector again during the cool-down period, it will not 
turn on. Wait until the cool-down period ends and the power button stops 
blinking.

When moving the projector:
■ Allow the projector to cool down before moving it. Then disconnect all 

cables.

■ Avoid bumps and jolts. Use a padded container when possible.
■ Observe temperature and humidity limits (see “Specifications” on page 71). 

If the projector is cold, allow it to warm gradually to avoid condensation.