Справочник Пользователя для HP (Hewlett-Packard) ep7100 Series

This installation is covered in detail in Chapter 1. See “Setting up the projector” 
on page 15 for more information.

Å

WARNING: To minimize the risk of injury from improperly installed 
equipment, it is recommended that a professional installer performs the ceiling 
installation.

1. Attach the projector to the ceiling using an HP L1733A ceiling mount kit. 

The base of the projector must by removed when it is attached to the ceiling 
mount. See the installation instructions provided with the ceiling mount kit.

2. After the projector is mounted on the ceiling, adjust the projector settings to 

match this setup. Press menu, select Setup > Projector position, and select 
Front Ceiling from the drop-down list.

1. Place the projector 1 to 10 m (3 to 33 ft) behind a translucent screen that is 

designed for rear projection.

See “Setting up the projector” on page 15 or “Installing on the ceiling” on 
page 47 for more instructions.

2. Press menu and select Setup > Projector position. Then select Rear Table 

or Rear Ceiling.