Справочник Пользователя для Vivitek dx6851

DU6871/DW6851/DX6831 DLP Projector - User's Manual

Connecting to AC Power Supply

The AC power cord is included in the box, plug the power cord to the AC socket (AC100V-

240V) on the back of the projector and plug another end of the AC power cord to the AC

outlet�

Note:

• Make sure the power system (including the project and power supply system) is properly grounded before

connecting to the AC power. The projector may be damaged without the grounding circuit.

• This is a high-brightness and high-watt projector. Do not modify the AC power cord or replace the power

cord arbitrarily to avoid causing damages to the projector or safety problems.

Turn on

Press ON on the remote control or POWER on the projector� The power and lamp LED

indicator flashes green to show warm-up.

EXIT

POWER INPUT

AUTO

SYNC ASPECT

The power and lamp LED indicator will light green and the projector lights turn on when the

projector is ready for use. Refer to the chapter of LED statuses if the LED indicator flashes

red� Please contact the Vivitek licensed dealer if the problem cannot be solved�

Starting to Use the Projector Setup