Справочник Пользователя для Adtran 616

Section 5 DLP-11 

Total Access 600 Series System Manual

 214

© 2004 ADTRAN, Inc.

61200624L1-1B

1. Connect to the Total Access 6XX using the CRAFT (RJ-48) port on the back of the Total Access 6XX.

If you are not already connected to the unit’s rear 

 interface, either with a VT100 compatible 

terminal or with a PC running VT100 emulation software, follow the procedure in DLP-1, Connecting a 
VT100 Terminal or PC to the CRAFT Port. Connecting to the 

 interface limits the configuration 

transfer procedure to 

 only.

2. Log in to the unit.

3. Go to the S

 menu and select C

 menu; press <Enter>.

4. Set the T

 menu to X

.

5. Select S

 to start the transfers. Enter Y to confirm the transfer and prepare the 

Total Access 6XX for the transfer download. 

The following message is displayed: This will begin sending a copy of the current system 
configuration.

6. Configure the VT100 terminal or terminal emulation software to R

 (and prompt for a filename).

7. View the C

 to verify the progress of the current transfer.

8. From the terminal emulation software, begin the XMODEM transfer by using the appropriate command 

sequence. For Windows HyperTerminal, select T

. Enter the filename (including 

path) and select XMODEM as the transfer method.

If necessary, refer to the terminal emulation software documentation for help. 

Because XMODEM data is being transferred inband through the menu interface, the VT100 menus of 
the Total Access 6XX will be inoperable from the 

interface. You can cancel the update at any 

time within the terminal emulation software. (Please consult the documentation provided by the 
terminal emulation software to determine how to do this.)

9. When the transfer has successfully completed, I

 displays in the C

 field 

and XMODEM D

 displays in the P

 field.