Справочник Пользователя для Mitsubishi Electronics DX-PC25EA
- 24 -
11.3.1 Connection and disconnection
When you click the [Connect] button on the recorder list window and enter your user name and
password on the login window, you will be connected to the selected digital recorder that is high-
lighted in the list.
Enter the user name and password that have been registered in the digital recorder you want to
access. In DX-TL2530E and DX-NT430E digital recorders, the default user name and password
are as follows:
password on the login window, you will be connected to the selected digital recorder that is high-
lighted in the list.
Enter the user name and password that have been registered in the digital recorder you want to
access. In DX-TL2530E and DX-NT430E digital recorders, the default user name and password
are as follows:
Administrator user
General user
User name: root
User name: guest
Password: admin000
Password: guest
By selecting another digital recorder and clicking the [Connect] button while you are communicat-
ing with the selected recorder, you will be disconnected from the selected recorder and connected
to such another recorder.
ing with the selected recorder, you will be disconnected from the selected recorder and connected
to such another recorder.
When you click the [Disconnect] command on the recorder list window, you will be disconnected
from the digital recorder you are communicating with. This button doesn’t work unless you are
communicating with a digital recorder.
from the digital recorder you are communicating with. This button doesn’t work unless you are
communicating with a digital recorder.
11.3.2 Registration - Available on the recorder list window of detailed type only
When you click the [Add...] button on the recorder list window of detailed type, the [Recorder
Property] window will appear. You can add digital recorders using this window.
Property] window will appear. You can add digital recorders using this window.
[DVR Name] (optional) ------- Enter the name of the digital recorder to register.
[Camera Name] (optional) --- Enter the name of the camera (or installation location) to register.
[IP Address] (essential) ------ Enter the IP address of the digital recorder to register. When
registering a DX-TL2530E or DX-NT430E digital recorder, enter the
IP address shown on its <ETHERNET> screen. DX-PC25EA commu-
nicates with the digital recorder based on this number. If you enter a
wrong number, DX-PC25EA doesn’t communicate correctly. In addi-
tion, duplicate IP addresses aren’t accepted.
IP address shown on its <ETHERNET> screen. DX-PC25EA commu-
nicates with the digital recorder based on this number. If you enter a
wrong number, DX-PC25EA doesn’t communicate correctly. In addi-
tion, duplicate IP addresses aren’t accepted.
[Recorder Ch] (optional) ----- You can select a camera or saved screen layout to use at the time of
connection.
[Info Port No.] (essential) ---- Enter the information port number of the digital recorder to register.
This number should be consistent with the setting value of the digital
recorder to be registered. When registering a DX-TL2530E or DX-
NT430E digital recorder, enter the number shown by [USER AC-
CESS] on the <SERVICE PORT SETTING> screen. The number
“53705,” which is the initial setting of DX-TL2530E and DX-NT430E
digital recorders, is displayed by default. DX-PC25EA communicates
with the digital recorder based on this number. If you enter a wrong
number, DX-PC25EA doesn’t communicate correctly.
recorder to be registered. When registering a DX-TL2530E or DX-
NT430E digital recorder, enter the number shown by [USER AC-
CESS] on the <SERVICE PORT SETTING> screen. The number
“53705,” which is the initial setting of DX-TL2530E and DX-NT430E
digital recorders, is displayed by default. DX-PC25EA communicates
with the digital recorder based on this number. If you enter a wrong
number, DX-PC25EA doesn’t communicate correctly.