Справочник Пользователя для Toshiba 26HL66
46
HL66 (E/F) Web 213:276
Chapter 7: Troubleshooting
LED indications
The blue and yellow LED lights on the TV front indicate the TV’s status, as described below:
Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow
LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.
LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.
If, after trying the solutions, the problem still exists:
•
In the U.S., call TACP Consumer Solutions at 1-800-631-3811.
•
In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click
“Home Entertainment,” and then click “Support.”
“Home Entertainment,” and then click “Support.”
LED Indication
Condition
Solution
1) Blue is ON (solid).
The TV is operating properly.
–
2) Yellow is ON (solid).
In Power-Saving mode
(standby with Power-On Mode Power-Saving).
(standby with Power-On Mode Power-Saving).
See “Selecting the Power-On Mode”
(
(
- page 21).
3) Yellow blinks three
times.
The TV is rebooting.
Wait several seconds until the yellow LED stops
blinking.
blinking.
4) Blue blinks slowly.
Abnormal operation of BUS line.
Turn OFF the TV and unplug the power cord.
Plug the power cord in again and turn ON the TV.
Plug the power cord in again and turn ON the TV.
5) Blue blinks quickly.
Power Protect Detection.
Yellow LED
Blue LED
TV front
2632HL66_EN.book Page 46 Tuesday, July 18, 2006 3:47 PM