Справочник Пользователя для Memorex MLT1522

After setting channels into memory, you can add or delete channels as follows: 

Press the POWER button 1 to turn on the TV; the POWER

indicator will light orange. Press the TV/VIDEO button 2

repeatedly to select the TV mode. Select a channel to

erase or add using the Direct Channel Selection/Number

(0-9) buttons 3. 

Press the MENU button 1; the Main Menu screen will

appear. Press the CHANNEL/Navigation UP 2 or DOWN 3

button to select TV SETUP, then press the ENTER button
4

to select it. 

Press the CHANNEL/Navigation UP 1 or DOWN 2 button

until ADD ERASE CH is selected, then press the ENTER

button 5 to select it. Select ADD, ERASE or EXIT using the

VOLUME UP/Navigation Right 3 or VOLUME

DOWN/Navigation Left 4 button. Press the ENTER button
5 

to confirm and exit the menu. If ERASE is selected, the

channel will be skipped when using the CHANNEL/

Navigation UP 1 or DOWN 2 button to select a TV

channel while in TV mode.

If you select EXIT, it will return to the TV Setup menu.

NOTE: If a channel is erased, you cannot use the Channel/Navigation UP or Down button to select that channel. You can

only use the Direct Channel Selection/Number (0-9) buttons to select that channel. Add the channel again so you can select

that channel using the Channel/Navigation UP or Down button.