Справочник Пользователя для Viewera V200T
Page 6
4. Power and extension cords
Do not allow anything to rest on the power cord.
Do not locate this product where persons will walk on the cord.
Do not locate this product where persons will walk on the cord.
Use the proper power cord with correct attachment plug type. If the power
source is 120V AC, use a power cord that has UL and C-UL approvals, If the
power source is a 240V AC supply, use the tandem (T blade) type attachment
plug with ground conductor power cord that meets the respective European
country’
power source is a 240V AC supply, use the tandem (T blade) type attachment
plug with ground conductor power cord that meets the respective European
country’
s safety regulations, such as VDE for Germany.
Do not over load wall outlets or power cords. Ensure that the total of all
units plugged into the wall outlet does not exceed 10 amperes.
Ensure that the total ampere ratings on all units plugged into the extension
cord is not above the cord’
s rating.
If the power supply cord, which came with your monitor, is to be connected
to the PC instead of the wall outlet, Use an UL/TUV approved computers
with receptacle rated 100~240V AC, 50/60Hz, 1.0A(minimum) only.
with receptacle rated 100~240V AC, 50/60Hz, 1.0A(minimum) only.
5. Environment
Place the monitor on a flat and leveled surface.
Place the monitor in a well-Ventilated place.
Keep the monitor away from：
Place the monitor in a well-Ventilated place.
Keep the monitor away from：
Overly hot, cold or humid places, places directly under sunlight, dusty
surroundings, equipment that generate strong magnetic fields.
Please adjust the frequency to 75 Hz after setting up the LCD monitor.
Then push the OSD menu button and use the Auto Adjust function to find
the best mode of your computer.