Руководство Пользователя для Vidikron VP-4200a
24
Vidikron PlasmaView Owner’s Operating Manual
PRE
L
IMINAR
Y
Audio Output: The PlasmaView has a stereo audio output for connection to an external A/V
receiver or powered speakers. The audio signal corresponding to the selected video input is
output to both the speakers and this audio output.
receiver or powered speakers. The audio signal corresponding to the selected video input is
output to both the speakers and this audio output.
Use a stereo miniplug to connect the PlasmaView stereo audio output to your external audio
equipment; see Figure 3-11.
equipment; see Figure 3-11.
Figure 3-11. Audio Output Connection
Speakers: The PlasmaView has an internal, 8W per channel stereo amplifier that can drive a
pair of stereo speakers. Connect the
pair of stereo speakers. Connect the
(positive) and
(negative) speaker wires to the EXT
SPEAKER terminals on both the LEFT and RIGHT channels; see Figure 3-12. Maintain the
correct polarity. For more information, refer to the owner’s manual for your speakers.
correct polarity. For more information, refer to the owner’s manual for your speakers.
Figure 3-12. Connecting Speakers
The audio output level is fixed. (The volume and mute controls affect only
the speaker outputs.)
the speaker outputs.)
Note
AUDIO AUDIO
INPUT1
AUDIO
OUTPUT
INPUT2
m
m
2
1
Twist exposed
wire strands
together.
wire strands
together.
Push tab to the open
position, and insert the
wire. Then, close tab
firmly to secure the wire
in place.
position, and insert the
wire. Then, close tab
firmly to secure the wire
in place.