Справочник Пользователя для Metz MF 55TK36

- 21 -

Copy Facility

Source selection for VCR recording.
• Select Features Menu in the Main Menu.
• Select AV-2 OUTPUT source pressing “ ” or

“ ” button.

Camera and Camcorder

To connect to Front-AV input

(FAV):

Connect  your  camera  or  camcorder  at  the

front side of your TV.
• Connect your equipment to the TV via VIDEO

(yellow), AUDIO R (red) and AUDIO L (white)

inputs. You should connect the jacks to the

input in the same colour.

Search for and store the test signal

of the video recorder

• Unplug the aerial cable from the aerial

socket  “ANT” of your video recorder.

• Switch on your TV and put the video recorder

on the test signal. (See the handbook for

your video recorder.)

• Enter the Tuning menu via the Install menu.
• Search for the test signal of your video re-

corder in the same way as you searched for

and stored the TV signals. See Tuning,

Search and Store TV channels. Store the

test signal under programme number 0.

• Replace the aerial cable in the aerial socket

“ANT” of your video recorder once you have

stored the test signal.

Connect the decoder to the video

recorder

Some  video  recorders  have  a  special

euroconnector for decoder.
• Connect a eurocable to the euroconnector of

your decoder and to the special euroconnector

of your video recorder. See also the hand-

book of your video recorder.

• To connect your video recorder to the TV, see

TV and Video Recorder section.

If  you  want  to  connect  more  equipment  to

your TV, consult your dealer.

Connecting Headphones

Use  the  stereo  headphone  socket  (HP)  on

the lower front / right side of your TV, to con-

nect  headphones.

Tips

Care of the Screen

Clean  the  screen  with  a  slightly  damp,  soft

cloth.Do  not  use  abrasive  solvents  as  they

may damage the TV screen coating layer

Poor Picture

Have you selected the correct TV system? Is

your TV set or house aerial located too close

to the loudspeakers, non-earthed audio  equip-

ment or neon lights, etc. ?
Mountains or high buildings can cause  double

pictures  or  ghost  images.  Sometimes  you

can  improve  the  picture  quality  by  changing

the direction of the aerial.
Is  the  picture  or  Teletext  unrecognisable?

Check  if  you  have  entered  the  correct  fre-

quency.
The  picture  quality  may  degrade  when  two

peripherals  are  connected  to  the  TV  at  the

same  time.  In  such  a  case,  disconnect  one

of the peripherals.

No Picture

Is  the  aerial  connected  properly?  Are  the

plugs  connected  tightly  to  the  aerial  socket?

Is  the  aerial  cable  damaged?  Are  suitable

plugs  used  to  connect  the  aerial?  If  you  are

in doubt, consult your dealer.
No Picture means that your TV is not receiv-

ing  any  transmission.  Have  you  pressed  the

correct keys on the remote control? Try once

more.

Sound

You can not hear any sound. Did you perhaps
interrupt  the  sound,  pressing  “

”key?  Are

external speakers connected to the TV?