Справочник Пользователя для VIZIO GV42L

VIZIO GV42L HDTV User Manual 

Version 8/1/2006 

31 

 

www.VIZIOCE.com 

 
For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 6. 
 

1.  Connecting the Power Cable 

Connect the power cord to the power cord connector on the back of the LCD HDTV, and then 
plug the power cord into an AC wall socket. 

2.  Connect Audio and Video Cables to the LCD HDTV 

(see pages 17 ~ 30 for detailed steps) 

3.  Turning Power On 

Once all the components are connected, press the Power ON 
button on the side of the LCD HDTV, or press the Power ON 
(Red) button on the remote control. 

4.  Select Input Source 

Select the Input Source for the LCD HDTV by pressing the 
INPUT button on the side of the TV or using the Input button 
on the remote control.  Pressing this button will cycle you 
through the following options: TV, AV1, AV2, Component 1, 
Component 2,  RGB, HDMI 1 and HDMI 2. 

5.  Using DTV and TV with an Antenna or Cable 

If an antenna or cable source is connected to the DTV/TV 
input, you will need to select TV using the INPUT button on the 
remote control or the side of the LCD HDTV, or directly by 
pressing the TV button on the remote control, and Auto Scan for the available TV channels.. 
 
Please follow the instructions below: 

a.  Select TV input (see Step 4 

above) by pressing the INPUT 
button on the side of the LCD 
HDTV or using the INPUT button 
on the remote control, or directly 
by pressing the TV button on the 
remote control.  The screen will 
show ‘snow’ and an OSD panel 
that says, “Initial Setup” 

b.  The Language option is 

highlighted and the default is 
English.  If you wish to change the 
OSD language to Français or 
Español, press the       or      
button on the remote control to select the language you want. 
 

 
 
 
 

Note: If you do not see this option within the OSD, you might have selected the wrong input in the 
previous steps and you will need to repeat step 4 (above) to select the correct input source.