Справочник Пользователя для VIZIO GV42L

VIZIO GV42L HDTV User Manual 

Version 8/1/2006 

49 

 

www.VIZIOCE.com 

When you first used your GV42LHDTV you will have setup your TV for DTV channels using the Initial 
Setup screens.  If you did not do this or if your setup has changed, you can do this from the TV TUNER 
SETUP menu. 

When the MENU button is pressed, the On Screen 
Display (OSD) appears on the PICTURE ADJUST 
page.  Press the    button to display the TV 
TUNER SETUP page for DTV. 
Press the        button to highlight the Tuner Mode 
selection. 
Press the     button to choose Cable or Air 
(Antenna) depending upon which equipment you 
have attached to the DTV / TV Input. 
 
 

Press the        button to highlight the Auto Search 
selection. 
Press the     button to Auto Search for TV channels 
available.  The TV will automatically search for analog 
and digital channels. 
 
 
 
 
 

After the TV has stored all of the available DTV channels in memory you will find that some channels will 
be too weak to watch comfortably or they may be channels you do not want to see.  Select the channel 
you wish to remove, press the MENU and       buttons to open the TV TUNER SETUP menu and then 
press the       button to highlight SKIP CHANNEL.  Press the OK button to select this channel to be 
skipped when using the CH+ or CH- button.  You will still be able to select this channel using the number 
buttons on the remote control. 
 

When receiving digital audio from the DTV / TV Input, the audio is output on the Optical Digital Audio 
connector of the rear of the TV.  To configure the output for your Receiver/Amp, press the       button to 
highlight the Digital Audio Out selection. 
Press the       button to select Dolby Digital or PCM.