Справочник Пользователя для Mitsubishi Electronics PD-5065

11

1. Plug the power cord into an active AC power outlet.

2. Press the POWER ON button (on the remote control)

to turn on the unit.

The monitor’s POWER/STANDBY indicator will light
up (green) when the unit is on.

3. Press the POWER STANDBY button (on the remote

control) to turn off the unit.

The monitor’s POWER/STANDBY indicator turns red
and the standby mode is set.

1. Press and hold the VOLUME 

 button (on the remote

control or the front panel) to increase the volume to the
desired level.

2. Press and hold the VOLUME 

 button (on the remote

control or the front panel) to decrease the volume to
the desired level.

Press the MUTE button on the remote control to cancel
the sound; press again to restore.

1. The screen changes each time the INFO button is

pressed.

2. If the button is not pressed for approximately three

seconds, the menu turns off.

Digital zoom specifies the picture position and enlarges
the picture.

1. Press the ZOOM (

 or 

) button to display the

magnifying glass. ( 

 

 )

Press the ZOOM 

 button to enlarge the picture.

A press of the ZOOM 

 button will reduce the

picture and return it to its original size.

Select the position with the 

▲▼

 

 buttons.

2. Press the EXIT button to exit the ZOOM mode.