Справочник Пользователя для Mitsubishi Electronics WD-73733

Parent menu, the Lock > Front Panel menu, 
and 

Setup > Edit > Lock.

• 

Video Settings.  Change video adjustments to 
get the best picture for your viewing conditions.  
See “AV Menu.”

Note:  You may wish to change the Picture Mode from 

the default 

Brilliant to either Bright or Natural, 

which are suitable for most home viewing envi-
ronments.

2.  To program the remote control to operate A/V 

devices not under NetCommand control, see 
Appendix D, “Programming the Remote Control.”

• 

Lamp Cartridge.  When the lamp cartridge 
needs replacement, 

and save the cost of a service call.  See 
Appendix C for instructions.

• 

General Cleaning.  See the cleaning recom-
mendations under “

About Your TV.”

•  For troubleshooting, service, and product 

support, see 

•  For warranty information, see the TV warranty 

in the back of this book.

1.  Remove the remote control’s back cover by gently 

pressing in the tab and lifting off the cover.

2.  Load the batteries, making sure the polarities (+) 

and (-) are correct.  For best results, insert the 
negative (-) end first.

3.  Snap the cover back in place.

Turning the TV On or Off
To turn the TV on or off, point the remote control 
at the front of the TV and press the 

POWER button.  

Alternatively, press the 

POWER button on the front 

panel of the TV.

1.  Press 

POWER again within about 30 seconds, 

while the lamp is still hot, to have the TV come 
back on immediately.

2.  If the 

LAMP indicator starts blinking (about 30 

seconds after you shut off power), 

1.  Power on the TV for the first time.
2.  Press     to select either 

English or Spanish 

for all menus.  You can later change the language 
selection through the 

Setup menu Language 

option.

Use the 

Setup menu for basic TV setup options.

1.  Press 

MENU to open the Main menu.

2.  Press   to highlight the 

Setup icon and display the 

Setup menu.