Справочник Пользователя для Mitsubishi Electronics WD-73733

Choose a viewing source from the 

Input Selection 

menu.  The current TV input appears as a full-color 
icon in this menu.

1.  Press 

INPUT to display the Input Selection menu.  If 

there are only two inputs to the TV,

 INPUT switches 

between them without displaying the menu.

2.  Highlight an input icon using         .
3.  Press 

ENTER to switch to the input and close the 

menu.

•  To assign meaningful names to the icons, see the 

Inputs > Name menu in chapter 5, “TV Menu Set-
tings.”

•  To rearrange the icons, see the 

Inputs > Order 

menu in chapter 5, “TV Menu Settings.”

The Sleep Timer turns the TV off after the length of time 
you set.

Setting the Sleep Timer
1.  Press 

SLEEP on the remote control.

2.  Press 

SLEEP additional times to increase the time in 

30-minute increments up to the maximum of 120 
minutes.

3.  Press 

EXIT or wait five seconds without pressing any 

buttons for the message to disappear.

4.  Press 

SLEEP to view the time remaining before the 

sleep timer turns off the TV.

Cancelling the Sleep Timer
1.  Press 

SLEEP to display the on-screen message.

2.  Press 

SLEEP repeatedly until OFF is displayed.

Note:  After five seconds of inactivity, the message box 

will disappear.

Turning the TV On or Off
To turn the TV on or off, point the remote control at the 
front of the TV and press the 

POWER button.  Alterna-

tively, press the 

POWER button on the front panel of the 

TV.

1.  Press 

POWER again within about 30 seconds, while 

the lamp is still hot, to have the TV come back on 
immediately.

2.  If the 

LAMP indicator starts blinking (about 30 

seconds after you shut off power), 

Controlling Sound Volume
Press 

VOL   /   to adjust the sound level.  See also 

“Controlling A/V Receiver Sound Volume” in chapter 2, 
“TV Setup.”

Changing Channels (antenna sources)
To change channels:
•  Enter the channel number using the number keys 

on the remote control and press 

ENTER.  For a two-

part digital channel, such as 3-1, press 

3  —

CANCEL  1 to 

enter a dash (separator).

•  Press 

CH   /   to change channels one channel at 

a time.

•  Press and hold  

CH   /   to move quickly through 

channels.

•  Press 

QV (QuickView) to switch back to the previ-

ously tuned channel.

•  Press 

GUIDE to display ChannelView channel listings, 

highlight a channel, and press 

ENTER.

•  Use the FAV (Favorites) feature to set up lists of 

favorite channels and tune to them with the 

FAV key.  

See “Setup Menu” in chapter 5.

NOTE:  Memorize channels to make finding channels 

easier.  See the 

Setup > Scan menu.