Справочник Пользователя для Mitsubishi Electronics PD-5010

32

The brightness of the screen, the position of the picture,
positive/negative mode and screen wiper are adjusted to
reduce uneven phosphor aging of the screen.

Example: Setting “PLE” to “LOCK”

1. Use the ▲ and ▼ buttons to select “FUNCTION”, then

press the MENU/ENTER button.
The “FUNCTION” screen appears.

2. Use the ▲ and ▼ buttons to select “LONG LIFE”, then

press the MENU/ENTER button.

The “LONG LIFE” screen appears.

3. Use the ▲ and ▼ buttons to select “PLE”.

4. Use the 

 and 

 buttons to select “LOCK”.

The mode switches as follows each time the 

 or

button is pressed:

When the picture input from the MONITORLINK input
terminal is distorted, select the most appropriate setting
from among “1”, “2”, and “3”.

Example: Setting “2”

1. Use the ▲ and ▼ buttons to select “FUNCTION”,

then press the MENU/ENTER button.
The “FUNCTION” screen appears.

2. Use the ▲ and ▼ buttons to select “M-LINK ADJ.”.

Use the 

and 

 buttons to select “2”.

The mode switches as follows each time the

 or 

buton is pressed:

  

4. Once the setting is completed...

Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.

  NOTE:  M-LINK ADJ is available only after

proprietary tuner/controller has been connected.

The position of the menu display will change. In such
a case, be sure to adjust the position.

To restore the original factory settings, go back to the
MAIN MENU.  Select “FUNCTION,”and then select
“RESET”.  Note that this also restores other settings to
the factory defaults.