Справочник Пользователя для Mitsubishi Electronics LT-3020
16
Connecting an Antenna to a Cable Box and VCR,
Connecting Audio/Video to the Cable Box or VCR
Connecting Audio/Video to the Cable Box or VCR
Figure 6. Connecting the VCR Audio/Video.
Note: The TV side panel and connections shown here are for reference only and may vary by model.
You may connect to the S-VIDEO or VIDEO
terminal but not to both.
terminal but not to both.
Cable Box
(Figure 5)
1. Connect the incoming cable to ANT on the TV
side panel.
side panel.
NOTE: For best performance, please see Composite
Video with Audio or S-Video with Audio,
below.
below.
Figure 5. Connecting the VCR with cable box.
Composite Video with Audio or S-
Video with Audio (Recommended)
Video with Audio (Recommended)
(Figure 6)
1. Connect a video or an S-Video cable from VIDEO
OUT on the VCR back panel to VIDEO or
S-VIDEO, INPUT-1 or INPUT-2 on the TV side
panel.
S-VIDEO, INPUT-1 or INPUT-2 on the TV side
panel.
2. Connect a set of audio cables from AUDIO OUT
on the VCR back panel to AUDIO INPUT-1 or
INPUT-2 on the TV side panel.
INPUT-2 on the TV side panel.
• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel
• The white cable connects to the L (left) channel
If your VCR is mono (non-stereo), connect only the
white (left) cable.
white (left) cable.
IN
OUT
Antenna
AUDIO OUT
AUDIO IN
VIDEO OUT
(Y/C)
MONITOR
1
L
R
L
R
1
2
VCR back panel
If your VCR has a video
channel or RF ON/OFF
switch, set to OFF.
channel or RF ON/OFF
switch, set to OFF.
Attach
only
one
cable
type
1
Attach only
one cable type
1
White
Red
White
Red
TV side panel - left
(Recommended if available)
1
2
2
AUDIO OUT
AUDIO IN
VIDEO OUT
(Y/C)
MONITOR
1
L
R
L
R
1
2
IN
OUT
Antenna
VCR back panel
IncomingCable
Cable Box Rear Terminals
IN
OUT
3
2
TV side panel (section detail)
3
2
1
LCD Monitor.indd 16
03/07/22, 16:17:32