Справочник Пользователя для Mitsubishi Electronics WD-Y577

In the 

Media Setup menu you can adjust the slide 

show display, number of repetitions, or display interval.
•  Select either 

Auto or Manual advance.  During 

manual operation, press 

 or 

ENTER to advance to 

the next slide.

•  For automatic advance, select the number of times 

(frequency) to play the complete slide show:  

Once, 

Twice, or Continuous.

•  For automatic advance, select the time interval for 

display of each slide.  The interval you select here is 
the minimum time between slides; actual time may 
be longer for larger files.

•  Press 

EXIT to close the Media Setup menu and 

return to the 

USB Photo menu.

•  Still images recorded on digital cameras using the 

Exchangeable Image File Format, version 2.1 (EXIF 
2.1) standard for digital still cameras and Design 
Rules for Camera File Systems version 1.0 (DCF 
1.0)

•  Some images opened and resaved on a computer 

may not play back or may not display in the thumb-
nail list.  This happens if the files were resaved in an 
incompatible format.

•  Full path file names can be no longer than 50 char-

acters and must end in a .jpg extension.  Not all 50 
characters will display.

•  Images on storage devices with a capacity of over 

256 MB can take a longer initial time to display.

Slide Show
Use these keys during the slide show:

Begin or resume slide show playback

Pause or resume playback while in auto-
matic advance mode.

 or 

Advance to the next slide.

Go to the previous slide.

F

ORMAT

Rotate the slide clockwise in 90˚ incre-
ments.
Stop slide show and display the 

USB Photo 

menu.

Display status for the viewing device and 
current image.

Display the 

Input Selection menu.

Display or remove the TV 

Main menu.

Note:  Always press   (STOP) to stop slide show play-

back before disconnecting from the USB Photo 
port.

Connect the camera to the TV using a composite video 
cable if:
•  You are unable to see images using the USB photo 

port.

•  You wish to view moving video from the camera.

The TV’s 

USB Photo menu will be unavailable and 

you must control the slide show through the camera.  
Display resolution is standard-definition (480i).

1.  Refer to the owner’s manual supplied with the 

camera for instructions needed for this setup.

2.  Set the camera’s output signal type to 

NTSC and 

put the camera into playback mode.

3.  With the camera still turned on, connect your digital 

camera’s composite video cable (usually yellow) 
to the 

INPUT 3 VIDEO/Y jack on the front of the TV.  

To hear audio, connect the camera’s audio output 
cable to the 

INPUT 3 L-AUDIO jack.

4.  When the 

Auto Input Sensing screen displays, 

press 

EXIT or assign the name Camcorder.

5.  Press 

INPUT to display the Input Selection menu.

6.  Highlight the icon for the camera input and press 

ENTER.

7.  If viewing photos, advance through the images 

manually or set the camera to advance automatically.

I

N

P

U

T

L-AUDIO-R

VIDEO/Y

Pb

Pr

3

USB

L-AUDIO-R

VIDEO/Y

$PNQPTJUF
7JEFP$BCMF

0QUJPOBM

"VEJP$BCMF