Справочник Пользователя для Mitsubishi Electronics WD-Y577

If you are connecting an antenna or direct cable without 
a cable box, connect the main antenna or cable source 
to 

ANT 1/MAIN.  Use ANT 2/AUX for a secondary source.

ANT 1/MAIN and ANT 2/AUX can each receive digital 

and analog over-the-air channels from a VHF/UHF 
antenna or non-scrambled digital/analog cable source.

Use these jacks to connect devices with component 
video outputs, such as DVD players, external HDTV 

receivers, or compatible video game systems.  See 

Appendix A specifications for signal compatibility.

Use the 

PC/DVI AUDIO INPUT when connecting a DVI 

device to one of the TV’s HDMI inputs using a DVI-to-
HDMI cable.  These jacks allow you to send left and 

right analog audio from your computer or other DVI 

device to the TV.

Use 

AVR AUDIO OUTPUT to send analog audio of the 

program currently shown on the screen to an A/V sur-
round sound receiver or stereo system.  Digital audio 
from digital channels and HDMI devices is converted to 
analog audio by the TV.  If using an analog A/V receiver 
or stereo system, this is the only audio connection 
needed between it and the TV.

ANT 2 / AUX

ANT 1 / MAIN

ANT 2/ AUX

ANT 1 / MAIN

ANT 2 / AUX

ANT 1 / MAIN

INPUT 1

INPUT 2

L

 

(

MONO)         R

AUDIO 

DIGITAL

AUDIO

OUT

HDMI

1

2

Y

Pb

Pr

AVR

AUDIO 

OUTPUT

S-VIDEO

VIDEO

3

L (MONO) - AUDIO - R

Y Pb Pr

 (480i/480p/720p/1080i)

VIDEO: 480i /480p /720p /1080i /1080p

AUDIO: PCM STEREO

PC: VGA / W-VGA / SVGA / W-SVGA /

       XGA / W-XGA / SXGA / 720p /1080p

  

IR EMITTER

NetCommand

R

PC/DVI

AUDIO

INPUT

COMPONENT 1

COMPONENT 2

ANT 2 / AUX

ANT 1 / MAIN

IR Emitter Jack included 
on Y series and 734 series 
models only.

Third HDMI input available on 
Y, 733, and 734 series models.