Справочник Пользователя для Mitsubishi Electronics 246 Series

To make audio adjustments:

•

 

Press 

   to highlight an option

Press 

    to display the submenu and adjust.

Press 

MENU to return to the AV menu.

•

  Press the 

AUDIO key repeatedly 

to display the audio option you want to change.  
Press      to change settings.

Controls volume of low-pitched sound from the TV speakers.

Controls volume of high-pitched sound from the TV speakers.

Controls audio balance between the right and left TV speakers

No special audio effects from the TV speakers

Modifies audio from the TV speakers.
•

For monaural (non-stereo) programs, creates a simulated stereo effect.

•

For stereo programs, creates a simulated surround sound effect.

Available for 
analog chan-
nels from 
ANT1/ANT2 or 
an analog VCR 
recording.

Default setting.  The TV plays stereo broadcasts in stereo and mono broadcasts in mono.  The 
word 

Stereo is displayed when you tune to a channel broadcasting in stereo.

Reduces background noise.  Use when receiving a weak stereo audio signal.  All audio is 
played as mono with this setting.

SAP
(Second Audio 
Program)

Selects an additional monaural sound track not audible during normal TV viewing.  The SAP 
signal might be related to the program (such as a sound track in a foreign language), or it 
might be unrelated (such as a weather report).  If an SAP signal is broadcast, the letters 

SAP 

are displayed when you tune to the channel

Selects the current language for a digital program from 

ANT1 or ANT2.  Each digital program 

may include zero to seven language choices.

Available  for digital channels from 

ANT1/ANT2  only

Reduces differences in sound volume between programming segments, such as the differ-
ence between regular broadcast programs and commercial segments.

The 

Speakers option displays only if an A/V receiver connection has been detected.  The setting you select is 

applied to all TV inputs.

Turns on the internal TV speakers.

Turns off the TV speakers so you hear sound only from a connected A/V receiver.
Note:  When you disconnect an analog A/V receiver, be sure to manually change the Speak-
ers setting to TV to hear sound from the TV speakers.

Off, On

The 

Subwoofer option displays only if a subwoofer connection has been identified on the SUB-

WOOFER OUTPUT jack.  The setting is applied to all TV inputs.  Use Off to turn off audio to a 
subwoofer or to reset the 

AVR AUDIO OUTPUT jack.  See reset instructions on page 16.