Справочник Пользователя для Mitsubishi Electronics 246 Series

Cable Box, Camcorder, CD/
Audio, DVD (DVD, DVD2, 
Blu-Ray), DVR, Game (Game, 
PS, Xbox, Wii), MP3 Player, PC,  
Satellite, VCR, AVR
On/Off (ANT 1 and ANT 2 only)
Delete (deactivated HDMI only)
Control On, Control Off (CEC-
enabled HDMI devices; operates 
only when 

HDMI Control is set to On)

Lets you assign or change names of inputs appearing in the 

•

Input Selection menu.

Press 

 

-

    to move between inputs.

Press 

 

-

   to select a name.

Lets you turn 

•

Ant-1 and Ant-2 On/Off (to display/hide in Input 

Selection menu).
Lets you delete unused HDMI inputs from the 

•

Input Selection 

menu.
If you change the name of an input after performing NetCom-

•

mand “learning,” the IR codes you “learned” are erased.

General Notes
When you change an input name in the 

Name menu and then exit the Name menu:

The name is changed

•

The icon in the 

•

Input Selection menu is changed

Audio and video settings are changed to the defaults for the new device type.

•

All previous NetCommand “learning” for the input is erased.

•

•

  When you disconnect an HDMI device, the icon remains in the 

Input Selection 

menu until you remove it.  Select 

Delete in the Inputs > Name menu to remove an unwanted icon for an HDMI input. 

•

ommand for HDMI and CEC-Enabled Devices:  If CEC conflicts occur, turn off CEC signals in one of 

these ways:  a) Turn off all NetCommand for HDMI signals from the TV (

Inputs > NetCommand HDMI Control 

menu), b)  Turn off NetCommand HDMI signals for specific devices (

Inputs > Name menu), or c)  Turn off each 

device’s internal CEC capability.  See Appendix E for the TV’s NetCommand for HDMI Control or, to turn on/off 
a specific device’s response to CEC signals, see the device’s owner’s manual.

•

Names of CEC-enabled devices:  CEC-enabled devices send their own predefined name to the TV.  You 
cannot change the name of a CEC-enabled device; applies only when 

Inputs > NetCommand HDMI Control 

is set to 

On.

Lets you put frequently used icons at the start of the 

Input Selection menu.

Press 

        to highlight the icon to move.

Press 

ENTER to confirm the selection.

Press 

        to drag the icon to the desired position.

Press 

ENTER to set the new position.

Sets up or changes NetCommand IR control of the current viewing device.  
See detailed instructions in chapter 6, “NetCommand IR Control.”

Sets up NetCommand IR control of an A/V receiver.
See detailed instructions in chapter 6, “NetCommand IR Control,” starting on page 60.

246 Series TV.  See Appendix D for the TV Guide Daily system.

Select 

On or Off to enable or disable the TV’s control of all CEC-enabled 

devices.  See Appendix E for details.

To turn CEC on or off for individual devices, use the 

Inputs > Name 

menu.