Справочник Пользователя для Mitsubishi Electronics 246 Series

When the picture 
shape seems incorrect, 
use 

FORMAT to change 

the shape of the 
picture.

Press the 

FORMAT key to cycle through 

the available formats to find the best 
format for the current picture.

The last-used format for a signal 
type is memorized for each input.  
The next time the same input and 
the same signal type is viewed, 
the last-used format will be 
recalled.

Reset
(for the single 
input currently 
being watched)

)

When the color 
intensities seem out 
of balance, use the 
PerfectColor/PerfecTint 
reset to reset the color 
balances to the original 
factory settings.
Both PerfectColor and 
PerfecTint and are reset 
at the same time.

While viewing the input to be 

reset, press 

MENU to display the 

Main menu with the A/V icon 
highlighted.
Use 

 to highlight 

PerfectColor 

and press 

ENTER to display the 

PerfectColor adjustment screen.
Press 

CANCEL to reset the colors.

All PerfectColor/PerfecTint sliders 
are reset to the original center 
position.  The PefectColor/PerfecTint 
settings for other inputs remain 
unchanged.

A/V Memory 
Reset
(for the single 
input currently 
being watched)

When audio and/
or video settings for 
a single input seem 
incorrect, use A/V 
Memory Reset to 
return the input to 
the original factory 
settings.

While viewing the input to be 

reset, press 

MENU to display the 

Main menu with the A/V icon 
highlighted.
Use 

 to highlight the 

Reset 

icon and press 

ENTER to reset.

All Audio and Video settings 
for the individual input are 
reset except for the Listen To, 
Language, audio Balance, and 
Closed Caption settings.

A/V Reset
(for all inputs)

To reset audio and 
video adjustments for 
all inputs to the original 
factory settings.

While viewing the TV, press the 
control-panel buttons 

GUIDE and 

FORMAT at the same time.

All Audio and Video settings are 
returned to the original factory 
settings, including Listen To and 
Language, plus Closed Captions 
settings and Format settings.

To erase and 
re-memorize channels 
on 

ANT 1 or ANT 2.

While viewing the TV, press 

MENU 

to display the 

Main menu.

Press 

 to highlight the 

Setup 

icon.
Press 

 to highlight the 

Scan 

icon.
Press 

 to highlight the antenna 

input and reception mode, e.g. 
Ant 1 Air.
Press 

 to highlight the 

Start 

button icon and press 

ENTER to 

start the memorization.

All previously memorized chan-
nels for the selected antenna 
input are erased and a new 
set of memorized channels is 
created.  All custom settings for 
Fav, channel names, and channel 
locks are deleted.  To add or 
delete individual channels, see 
Edit menu instructions on page 
45.

246 Series TV.  CableCARD 
channels are reacquired.

You can resolve many common TV problems using 
the reset functions described in the following table.  
See also the troubleshooting suggestions later in this 
appendix.

IMPORTANT
Before you change sound or picture settings:  If 
picture or sound settings seem wrong for a broadcast 

channel (a channel from 

ANT 1, ANT 2, a cable box, or 

satellite receiver), first check other channels from the 
same input before changing settings.  If most other 
channels from the same input seem correct, there is 
likely a problem with the broadcast rather than with the 
TV.  Use care in this case, as changes you make to fix 
problems on individual channels also affect all other 
channels on the same input.