Справочник Пользователя для VIZIO D28h-C1
A
Troubleshooting & Technical Support
53
There is no power.
• Ensure the TV is plugged into a working electrical outlet.
• Ensure the power cable is securely attached to the TV.
• Press the
• Ensure the power cable is securely attached to the TV.
• Press the
Power/Standby button on the remote or on the
side of the TV to turn the TV on.
The power is on, but there is no image on the screen.
• Ensure all cables are securely attached to the TV.
• Ensure all devices are connected correctly. Devices differ;
• Ensure all devices are connected correctly. Devices differ;
see your device’s user manual for details.
• Adjust Brightness, Contrast, or Backlight. See
• Press the
INPUT button on the remote to select a different
input source.
The TV displays “No Signal.”
• Press the
INPUT button on the remote control to select a
different input source.
• If you are using cable TV, satellite, or an antenna connected
The buttons on the remote aren’t working.
• Ensure you are only pressing one button at a time.
• Point the remote directly at the TV when pressing a button.
• Replace the remote batteries with new ones. See
• Point the remote directly at the TV when pressing a button.
• Replace the remote batteries with new ones. See
The image quality is not good.
• For the best image quality, view high-definition programs
using digital sources. Connect your devices with HDMI
cables.
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the room
or close to a window for the best signal.
The colors on the TV don’t look right.
• Adjust the Color and Tint settings in the Picture menu. See
• Select a pre-set picture mode. See
Calibrated mode.
• Check all cables to ensure they are securely attached.
The picture is distorted.
• Nearby electrical devices may be interfering with the
TV. Separate the TV from electrical appliances, cars, or
fluorescent lights.
• Ensure all cables are securely attached.
I see “noise” or static on the screen.
• When your TV’s digital capabilities exceed a digital
broadcast signal, the signal is up-converted (improved) to
match your TV’s display capabilities. This up-converting can
sometimes cause irregularities in the image.
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the room
or close to a window for the best signal.