Справочник Пользователя для Bosch UML-262-90

en | Navigating the Monitor

Full HD LCD Monitors

F.01U.172.600 | 1.0 | 2010.10

User’s Manual

Bosch Security Systems, Inc.

The UML-262-90 and the UML-422-90 have two (2) modes: 

Video and PC. The LCD is programmed through the on-screen 

display (OSD) menus and submenus where an operator can 

select operating parameters. To access the OSD menus, press 

the Menu button on the control panel or on the remote control. 

Use the control panel of the monitor or the remote control to 

make any necessary adjustments to the OSD.

To navigate the set up menus, follow the steps below:

1.

Connect the CVBS, S-Video, DVI, HDMI, or the VGA cable.

2.

Press the Power button to turn on the unit (see 

Figure 6.1).

3.

If required, press the Input or Enter button and the 

 and 

 buttons until a signal is displayed.

4.

Press the Menu button to activate the main menu 

selections (see Figure 6.1).

5.

Press the 

 and   buttons to select a menu.

6.

Press the 

 button to enter the selected menu.

7.

Press the 

 and 

 buttons to select a sub-menu item.

8.

Press the 

 

 button to toggle the OSD values.

9.

Press the Menu button to exit the selected menu and to 

return to the menu bar or to confirm a selection.

10. Press the Menu button again to exit the OSD menu bar.

When you are navigating through the OSD menus, use the Input 

or Enter button to select a menu and use the Menu button to 

exit a menu.