Справочник Пользователя для Honeywell HD-16DVR-C

Honeywell 

 

49 

Note 

The camera video should be in the current screen. 
Before setup, check whether the following connections 
are right: 

  PTZ and decoder connection  
  Decoder address setup 
  Decoder A (RS485 +) / B (RS485 -) line connects with 

DVR A/B line 

Boot up the DVR, and input the user name and password. 

In the main menu, select SettingPan/Tilt/Zoom. The interface is shown 
as in 

. Here you can set the following items: 

 

Channel: Select the channel

 connected with the speed dome video 

port.

 

 

Protocol: Select the corresponding PTZ protocol (such as PELCOD). 

 

Address: 

Identical to the device address set in the speed dome. 

Default address is 1. 

 

Baud rate: Select corresponding baud rate. 2400 for Pelco-D 
protocol. 

 

Data bits: Select corresponding data bits. Default value is 8. 

 

Stop bits: Select corresponding stop bits. Default value is 1. 

 

Parity: There are three options: Odd/Even/None. The default value 
is None.