Справочник Пользователя для Fostex D-160

Скачать
Страница из 196
D-160 Owner's Manual (MMC/FEX List/Maintenance/Specifications)
189
Maintenance
Cleaning the exterior
* For normal cleaning, use a soft dry cloth.
For stubborn dirt, moisten a cloth in diluted detergent, wring it out firmly, and wipe the
dirt off.  Then polish with a dry cloth.
Never use solvents such as alcohol, thinner or benzene, since these will damage the
printing and finish of the exterior.
Specifications
Input/Output
INPUT (1 ~ 8)
Connector
: RCA pin jack (X 8)
Input impedance : 10kΩ or more
Input level
: -10dBV
OUTPUT (1 ~ 16)
Connector
: RCA pin jack (X 16)
Load impedance : 10kΩ or more
Output level
: -10dBV
DATA IN/OUT
Connector
: Optical (X 4)
Format
: (1) IEC 958 Part 2 (=S/P DIF)
: (2) Alesis Proprietry Multi Channel Optical Interface
(Either (1) or (2) is selected in the Setup mode.)
MIDI IN/OUT/THRU
Connector
: DIN 5PIN (X 3)
Format
: MIDI standard
SCSI
Connector
:D-sub 25 pin (X1)
PUNCH IN/OUT
Connector
: ø6mm Phone jack (X 1)
(An optional FOOT SW Model 8051 can be
connected.)
REMOTE
Connector
: D-sub 15PIN (X 1)
Recording/Reproducing
Recording medium
: 3.5 inch, hard disk x 1 (E-IDE type),
(Optional hard disk)
Recording format
: FDMS-3*
Save/Load format
: FDIO-1 Ver.2**
Sampling frequency
: 44.1kHz/48kHz
Quantization
: 16-bit linear (Non expanded)
A/D: 18-bit 64-time, over sampling, Delta-Sigma
D/A: 20-bit 128-time, over sampling, Delta-Sigma