Справочник Пользователя для JVC D-VHS

Скачать
Страница из 92
Masterpage:Left-FullCol
72
 
EN
Filename [HM-DH5U_Eng.fm]
EDITING
i.LINK/DV 
Connections
NOTES:
You cannot use the i.LINK connection depending on the type 
of camcorder equipped with the DV connector. In this case, 
set “LINC” to “OFF” (
If the 44.1 kHz PCM audio signal is input via DV connector, 
recording cannot be performed properly.
During DV input, the image format output to the TV will be 
480i even if “TV OUTPUT 2” is set to “ALLto480p” (
(ON/OFF) of HDMI is also disregarded, however, if the HDMI 
at the TV supports image format other than 480i, the HDMI 
output will be muted. The menu settings and the HDMI status 
will be retained and changes can be made.
If you are using a TV with DVI input, and it does not support 
480i image format, use the TV’s analog input instead.
A You can use a camcorder as the playback device 
and your VCR as the recording VCR.
This VCR (for recording)
To [i.LINK]
DV cable (not supplied)
To DV output
DV camcorder
(for playback)
This VCR supports the copy protection technologies of 
DTLA (Digital Transmission Licensing Administrator). 
These technologies are admitted by DTLA .
It is impossible to dub copy-limited signals between 
the devices which supports copy protection 
technologies of DTLA. It is impossible to dub to other 
tapes the program which only one recording is 
permitted.
When connecting to other devices, only the operation 
of the devices which supports DTLA is guaranteed. 
The operation of non-DTLA-supported devices is not 
guaranteed.
B You can use your VCR as the playback or 
recording VCR.
E.g. When using this VCR as the recording VCR
This VCR (for recording)
To [i.LINK IN/OUT]
i.LINK cable 
(not supplied)
To [i.LINK IN/OUT] connector
Another VCR (for playback)
HM-DH5U_Eng.fm  Page 72  Friday, June 25, 2004  11:42 AM