Справочник Пользователя для JVC D-VHS
Masterpage:Left-FullCol
78
EN
Filename [HM-DH5U_Eng.fm]
MULTI-BRAND REMOTE CONTROL (cont.)
Changing
Remote Control
Code
Remote Control
Code
NOTE:
When “POWER SAVE” is set to “ON”, you can not change the
remote control code. Before changing the code, set “POWER
SAVE” to “OFF” (
remote control code. Before changing the code, set “POWER
SAVE” to “OFF” (
The Remote is capable of controlling four JVC video
recorders independently. Each of VCRs can respond to
one of four codes (A, B, C or D).
This Remote control is preset to send A code signals
because your VCR is initially set to respond to A code
signals. You can easily change your Remote and the VCR
to send and respond to B, C or D code signals.
When using four JVC VCRs, set the four VCRs and their
Remotes to different codes, so that the Remotes can
operate these VCRs separately.
recorders independently. Each of VCRs can respond to
one of four codes (A, B, C or D).
This Remote control is preset to send A code signals
because your VCR is initially set to respond to A code
signals. You can easily change your Remote and the VCR
to send and respond to B, C or D code signals.
When using four JVC VCRs, set the four VCRs and their
Remotes to different codes, so that the Remotes can
operate these VCRs separately.
A
Set remote operation mode
Set the [VCR/TV/CABLE/DBS] selector to [VCR].
B
Set remote control code for
Remote
Remote
A Press and hold [A/B/C/D].
B Press the ‘Number’ key [1] for A code control
B Press the ‘Number’ key [1] for A code control
signals, [2] for B code control signals, [3] for C
code control signals and [4] for D code con-
trol signals.
code control signals and [4] for D code con-
trol signals.
C Press [STOP (L)], and release [A/B/C/D].
C
Turn off VCR
Press [POWER] on the VCR.
D
Check remote control code for VCR
Press [PLAY (I)] on the VCR for more than 5
seconds.
seconds.
•
The code currently set appears on the front
display panel.
display panel.
E
Turn on VCR
Press [POWER] on the Remote.
•
The code transmitted from the Remote blinks for
a few seconds on the front display panel.
a few seconds on the front display panel.
•
After the code disappears on the front display
panel, make sure that the VCR is turned on by
pressing [POWER] on the Remote.
panel, make sure that the VCR is turned on by
pressing [POWER] on the Remote.
To control four VCRs with the same Remote
You can control four JVC VCRs by switching the remote
control code for the Remote between A,B, C and D as
in step
You can control four JVC VCRs by switching the remote
control code for the Remote between A,B, C and D as
in step
B
, keeping four VCRs to different control codes.
•
Press the ‘Number’ key [1] for A code control signals,
[2] for B code control signals, [3] for C code control
signals and [4] for D code control signals. (To change
only the remote control code for the Remote, DO NOT
perform steps
[2] for B code control signals, [3] for C code control
signals and [4] for D code control signals. (To change
only the remote control code for the Remote, DO NOT
perform steps
C
to
E
.)
[POWER]
[PLAY(I)]
B
- A,C
B
- C
B
- B
C
E
VCR
TV
CABLE
/DBS
A
(E.g.) To set Remote to B code:
A/B/C/D
ABC
STOP
Hold
down
down
Press in succession
Release
HM-DH5U_Eng.fm Page 78 Friday, June 25, 2004 11:42 AM