Справочник Пользователя для Maxtor SLD240

21 

This section shows you how to operate the fast, slow, and single picture playback functions, and details 

how the unit is to playback a file in a different operation status. Please refer to the following paragraphs 

specifying the relevant details. When playing a file,  the monitor should display a flashing PLAY message 

and the PLAY button 

  will light up indicating that the DVR is in the playback status. 

 

 

 

In recording mode, press the stop button.  Press play to play back the video just recorded. 

 

For this type of playback, refer to Section 4.4. 

 

Press and hold the stop button for 3 seconds. The “Stop” indicator will appear on the top right side of the 

screen. To play the oldest video, press PLAY.  

 

There are 7 speeds available for playback: 1x, 2x, 4x, 8x, 16x, 30x and 100x 

While playing back recorded video at recorded speed: 

 

Forward:  Turn the Shuttle  dial 

  clockwise to view the recorded video in the forward direction at a 

speed faster than the recorded speed. Each subsequent turn of the shuttle clockwise increases 

the forward rate, as 2x, 4x, 8x, 16x, 30x and 100x. 

 

Reverse:  Turn the Shuttle dial 

  counterclockwise to view the recor ded video in the reverse direction 

at a speed faster than the recorded speed. Each subsequent  turn of  the  shuttle to the 

counterclockwise increases the reverse rate, as -1x, -2x, -4x, -8x, -16x, -30x and -100x. 

 

Normal: 

 Release the Shuttle dial 

 to return to the normal speed of playback. 

  * You can also operate by using “<” button 

 and “>” button 

.