Справочник Пользователя для Magnavox MDR535H
76
EN
EN
SPECIAL PLAYBACK
Note
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• To exit the zoom menu, press [RETURN] repeatedly
at step 3.
• To cancel the zoom function, select “x1.0” using
[
K / L], then press [OK] at step 3.
• When you zoom a picture during a slide show, the
slide show will be put in the pause mode. Press
[PLAY
[PLAY
B] to resume the slide show and the zoom
function will be turned off.
1) During playback, press [DISPLAY].
2) Use [
{ /
{ B] to select
menu.
e.g.) DVD-video
1/ 5
1/ 5
DVD
0:01:00 / 1:23:45
Video
3) Use [
K/L] to select a desired zoom factor to zoom,
then press [OK].
1/ 5
1/ 5
DVD
× 1.2
× 1.5
× 2.0
× 1.5
× 2.0
0:01:00 / 1:23:45
Video
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
Zoom area will be displayed.
4) Use [
K/L /{/
{ B] to select a desired zoom position,
then press [OK].
Zoom playback will start.
This feature allows you to assign a specific point on a title
to be called back later.
to be called back later.
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
If the display menu is already shown, skip to step 2.
2) Use [
{ /
{ B] to select
to display the marker list.
e.g.) DVD-video
1/ 5
1/ 5
DVD
0:01:00 / 1:23:45
Video
3) Use [
K /L] to select a desired marker number.
When it reaches the desired point, press [OK].
1/ 5
1/ 5
DVD
---
---
---
---
---
---
---
---
---
---
---
1
2
3
4
5
6
0:01:00 / 1:23:45
Video
The title (track) number and the time will be displayed.
4) To return to the marker later:
Use [
K /L] to select the desired marker number,
then press [OK].
Note
• To clear a marker, select the marker number to be
cleared, then press [CLEAR].
• All markers will be erased when you operate these
operations listed below.
– opening the disc tray (DVD/CD only)
– turning the unit to the standby mode (DVD/ CD only)
– make additional recording on the disc (DVD only)
– editing any title (DVD only)
– dividing the title (HDD only)
– deleting a scene of the title (HDD only)
• You can mark up to 6 points.
• Marker setting is not available when you play back
– turning the unit to the standby mode (DVD/ CD only)
– make additional recording on the disc (DVD only)
– editing any title (DVD only)
– dividing the title (HDD only)
– deleting a scene of the title (HDD only)
• You can mark up to 6 points.
• Marker setting is not available when you play back
the video CD with PBC function.
Zoom
Marker Setting
E2S05_07_08UD_UH_MDR533_535_537H_EN_v2.indd 76
2013/02/12 21:06:26