Справочник Пользователя для Panasonic ag-hpx300p

1

Chapter

Men

uOper

ations

LOW GAIN

Sets the gain value assigned to the L position of the 
GAIN switch.
–3dB, 0dB, 3dB, 6dB, 9dB, 12dB

MID GAIN

Sets the gain value assigned to the M position of the 
GAIN switch. 
–3dB, 0dB, 3dB, 6dB, 9dB, 12dB

HIGH GAIN

Sets the gain value assigned to the H position of the 
GAIN switch. 
–3dB, 0dB, 3dB, 6dB, 9dB, 12dB

ATW

Allows you to assign the ATW (Auto Tracking White 
Balance) function to the WHITE BAL switch. (For 
details, refer to page 49.)
Bch: 

Controls the ATW function when the WHITE BAL 

switch is set to B position. 
OFF: 

Does not assign the ATW function to the WHITE 

BAL switch.  

•  A USER button to which ATW has 

been assigned cannot be used to turn 
ATW off when the WHITE BAL switch is 
set to B position and this menu is set 
to Bch.

ATW TYPE

Selects type of ATW (Auto Tracking White Balance) 
function operation.  
1:

 Standard ATW operation

 Further restricts the color of the light source range 

that is tracked than setting 1.
ATW operation reduces the risk of miscalculating light 
sources.

W.BAL.PRESET

Sets the color temperature assigned to the PRST 
position of the WHITE BAL switch. 
3.2K, 5.6K

USER MAIN

Sets the function assigned to the USER MAIN button.  
REC REVIEW, SPOTLIGHT, BACKLIGHT, ATW, 
ATWLOCK, GAIN: 24 dB, Y GET, DRS, TEXT MEMO, 
SLOT SEL, SHOT MARK, MAG A. LVL, PRE REC, 
PC MODE, WFM, FBC
For details, refer to [Assigning functions to USER 
buttons] (page 53). 

•  When a remote controller (AJ-RC10G) 

is connected, the SPOTLIGHT 
and BACKLIGHT functions are not 
available.

USER1

Sets a function assigned to the USER1 button.  The 
functions that can be assigned to this button are the 
same as for the USER MAIN button. 
BACKLIGHT

 (factory default setting)

For details, refer to [Assigning functions to USER 
buttons] (page 53). 

USER2

Sets a function assigned to the USER2 button.  The 
functions that can be assigned to this button are the 
same as for the USER MAIN button. 
TEXT MEMO

 (factory default setting)

For details, refer to [Assigning functions to USER 
buttons] (page 53). 

RET SW

Sets the function assigned to the RET button on the 
lens.  
REC REVIEW, TEXT MEMO, SHOT MARK

WFM

Selects the waveform displayed in the LCD monitor 
when the user button to which WFM has been 
assigned is pressed.
WAVE: 

Displays a waveform. 

Vectorscope display

Each press of the button, switches 

the settings in the following order: OFF 



 WAVE 

(waveform) 



 VECTOR 



 OFF.  

____ indicates the factory setting