Справочник Пользователя для Panasonic ag-hpx300p

11

Chapter

Men

uOper

ations

25M REC CH SEL

Selects the audio channels to be recorded in the 
DVCPRO and DV formats. 
2CH: 

Only recorded on CH1 and CH2. 

Records on all four channels. 

•  Not available in the following 

conditions. 
-  When SYSTEM MODE is 1080i-59.94i 

or 720-59.94P. 

-  When SYSTEM MODE is set to 480-

59.94i and REC FORMAT is set to the 
DVCPRO50 codec. 

-  REC SIGNAL is set to 1394 

(operation depends on 1394 input 
status). 

TEST TONE

Selects the test signal. 
NORMAL: 

Outputs test tones to channels 1, 2, 3 and 

4 when the OUTPUT/AUTO KNEE selector switch is 
set to BARS and the AUDIO IN switch CH1 is set to 
FRONT. 
ALWAYS: 

Outputs test tones to channels 1, 2, 3 and 

4 at all times when the OUTPUT/AUTO KNEE selector 
switch is set to BARS. 
CHSEL: 

Outputs test tones to  channels selected by 

setting the AUDIO IN switch CH1 or CH2 to FRONT 
and the OUTPUT/AUTO KNEE selector switch is set to 
BARS. (Test tones are not output to CH3 and CH4.)
OFF: 

Does not output a test tone. 

F.MIC POWER

Turns on and off the phantom power supply for the 
front microphone. 
ON, OFF

R.MIC POWER

Turns on and off the phantom power supply for the 
rear microphone. 
ON: 

Turns on the phantom power supply to the 

microphone when the rear LINE/MIC/+48V switch is 
set to +48V. 
OFF: 

Does not supply phantom power to the 

microphone even when the rear LINE/MIC/+48V switch 
is set to +48V. 

MONITOR SELECT

Switches the output signal to AUDIO OUT, earphones 
and speaker when the MONITOR SELECT switch is 
set to ST. 
STEREO, MIX

F.MIC LEVEL

Selects the input level for the front microphone. 
–40dB, –50dB, –60dB

R.MIC CH1 LEVEL

Selects the input level for the rear microphone 
connected to CH1. 
–50dB, –60dB

R.MIC CH2 LEVEL

Selects the input level for the rear microphone 
connected to CH2. 
–50dB, –60dB

HEADROOM

Sets the headroom (standard level). 
18dB, 20dB

WIRELESS WARN

Sets whether a warning should be output when 
wireless receiver reception is poor. 
ON, OFF

WIRELESS TYPE

Selects wireless receiver type. 
SINGLE: 

1-channel receiver

2-channel receiver

•  When DUAL is selected for a 1-channel wireless 

receiver, CH2 and CH4 will stay mute. 

1394 AUDIO OUT

Selects audio channel output to 1394 OUT in DVCPRO 
or DV mode. 
CH1/CH2, CH3/CH4

•  Available only when SYSTEM MODE is 

set to 480-59.94i and REC FORMAT is 
set to DVCPRO or DV. 

____ indicates the factory setting