Справочник Пользователя для Panasonic ag-hpx300p
1
Chapter
P
ar
ts
and
their
their
Functions
Audio (input) Function Section
1
6
2
7
3
5
4
8
1 MIC IN (microphone input) jack (XLR, 3-pin)
• Connect a microphone (optional accessory) to this
jack.
• A phantom-powered microphone may be connected.
To use a phantom-powered microphone, set the menu
option F.MIC POWER to ON in the AUDIO SETUP
screen.
option F.MIC POWER to ON in the AUDIO SETUP
screen.
For details, refer to [Preparing for Audio Input]
(page 95).
(page 95).
2 AUDIO LEVEL CH1/CH2 (audio channel 1/2
recording level adjustment) controls
• With the AUDIO SELECT CH1/CH2 switch positioned
• With the AUDIO SELECT CH1/CH2 switch positioned
to MAN, these controls can be used to adjust the
recording levels for audio channels 1 and 2.
recording levels for audio channels 1 and 2.
• Note that the controls are designed to be locked. For
adjustment, each control must be depressed while
turning.
turning.
3 AUDIO SELECT CH1/CH2 (audio channel 1/2
automatic/manual level adjustment selector) switch
Use this switch to select recording level control mode
for Audio Channels 1 and 2.
AUTO:
Use this switch to select recording level control mode
for Audio Channels 1 and 2.
AUTO:
Recording level automatically controlled.
MAN:
Recording level manually controlled.
For details, refer to [Adjusting Recording Levels]
(page 54)
(page 54)
4 AUDIO IN (audio input selector) switch
Use this switch to select signals recorded through
audio channels 1 – 4.
FRONT:
audio channels 1 – 4.
FRONT:
Records signals from a microphone
connected to the MIC IN jack.
W.L.(WIRELESS):
Records signals from a wireless receiver.
REAR:
Records signals from audio devices or
microphones connected to the AUDIO IN
CH1/CH2 connectors.
CH1/CH2 connectors.
NOTE
To record 2-channel wireless input, switch both CH1 and
CH2 to W.L. position and set the menu option WIRELESS
TYPE in the AUDIO SETUP screen to DUAL.
CH2 to W.L. position and set the menu option WIRELESS
TYPE in the AUDIO SETUP screen to DUAL.
5 AUDIO IN CH1/CH2 (audio channel 1/2) connectors
(XLR, 3-pin)
Audio devices or microphones may be connected here.
Audio devices or microphones may be connected here.
For details, refer to [When Using Audio Devices]
(page 96).
6 LINE/MIC/+48V (line input/mic input/mic input +48V)
selector switch
Use to select audio signals input to the AUDIO IN CH1/
Use to select audio signals input to the AUDIO IN CH1/
CH2 connectors.
LINE:
LINE:
Line input for audio signals input from an
audio device
MIC:
Audio signal input from microphone with
internal power supply (the camera does not
supply power to a phantom microphone).
+ 48V:
Audio signal input from a microphone that
requires an external power supply (The
camera supplies power to a phantom
microphone).
NOTE
Power is supplied when the menu option
R.MICPOWER in the AUDIO SETUP screen is
set to ON.
R.MICPOWER in the AUDIO SETUP screen is
set to ON.
7 FRONT AUDIO LEVEL (audio recording level
adjustment) control
• This control adjusts the recording level of audio
• This control adjusts the recording level of audio
channels 1 and 2.
• With the AUDIO SELECT CH1/CH2 switch positioned
to MAN, this control can be used to adjust the
recording levels for audio channels 1 and 2.
• Use the menu options FRONT VR CH1 and FRONT
VR CH2 in the AUDIO SETUP screen to select the
input connector this control will be used for.
8 Wireless slot
A Unislot wireless receiver (optional accessory) may be
attached here.