Справочник Пользователя для Panasonic VDR-D160GN

LSQT1184

∫ [

≥ OFF

≥ ON

The screen indications are selected as shown 
in the illustration below.

∫ [

≥ OFF

≥ 5 MINUTES

[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes passed without any 
operation, this unit automatically turns off to 
prevent the battery from running down. When 
you use this unit, turn it on again.
≥ In the following cases, the unit may not turn 

off even when you set this to [5 MINUTES].
– When using the AC adaptor
– When connecting the unit to a computer or 

printer via the USB cable

∫ [

≥ OFF

≥ ON

This allows operations such as starting and 
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an 
operation such as recording is started or 
ended.

1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the computer or 
the printer, etc.

2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs e.g. recording not 
starting. Check the sentence displayed on the 
screen. (l 98)

∫ [

≥ YES

≥ NO

When there is a menu that cannot be selected 
depending on a combination of functions, set to 
[YES] for changing the menu settings back to 
the initial shipping condition.
(Language setting cannot be back to the initial 
shipping condition.)

∫ [

≥ OFF

≥ ON

This item is used to start the unit 
demonstration.
(Only when using the AC adaptor and the mode 
dial is at the 

 or 

 position)

If you set this to [ON] without inserting a disc or 
an SD card, this unit is automatically set to the 
demonstration mode for introducing its 
functions. If any button is pressed or operated, 
the demonstration mode is cancelled. If no 
operations take place for approx. 10 minutes, 
the demonstration mode automatically starts. 
To terminate the demonstration mode, insert a 
disc or an SD card, or set this to [OFF]. For 
normal use, set this function to [OFF].

∫ [

≥ PictBridge

≥ PC CONNECT

[PictBridge]:
When you connect the unit to a printer via the 
USB cable.
[PC CONNECT]:
When you connect the unit to a computer via 
the USB cable.

;

;

LSQT1184(ENG).book  95 ページ  ２００７年２月５日　月曜日　午後１時２９分