Справочник Пользователя для Olympus DS-10
30
Remove the recorder from the cradle
4
Make sure that the recorder's
record/play indicator lamp isn't
flashing, and remove the recorder
from the cradle.
record/play indicator lamp isn't
flashing, and remove the recorder
from the cradle.
Hold the cradle with your hand, and raise
the recorder from the top end to remove it
from the hook, as shown in the illustration.
the recorder from the top end to remove it
from the hook, as shown in the illustration.
5
Disconnect the USB
connecting cable.
connecting cable.
Notes
• Do not needlessly touch the connection point on the front
of the cradle (at the low end), as that may cause damage
resulting in a bad connection.
resulting in a bad connection.
• Release the HOLD switch (
☞ P.7).
Connecting to
Y
our PC / Running DSS Player
Running DSS Player
1
Start Windows.
2
Connect the recorder to your PC.
For the connection procedure, refer to
“Connecting to Your PC” (
“Connecting to Your PC” (
☞ P.29).
When you connect the recorder to your PC
for the first time, the USB Driver Setup
Wizard will open. Follow the instructions
on the screen to install the driver.
for the first time, the USB Driver Setup
Wizard will open. Follow the instructions
on the screen to install the driver.
3
Click on the [Start] button, select
[Programs], then [Olympus DSS
Player 2002].
[Programs], then [Olympus DSS
Player 2002].
4
Click on [Olympus DSS Player
2002].
2002].
3
4
3