Справочник Пользователя для Panasonic WJ-HD500A

29

The Hard Disk requires formatting before it can be used for
storing images, as shown below.

• When the Hard Disk in the Disk Recorder is replaced.

(Disk formatting is required for the replaced Hard Disk.)

• When the optional extension units are operated for the

first time after installation.
(Disk formatting is required for the Hard Disk in the
Extension Unit.)

•

Remember that by formatting the hard disk all previ-
ously recorded data on the disk will be erased.

•

If the Disk Recorder is set up with the mirroring
function, the replaced Hard Disk is automatically
copying the data from the other disk of the pair after
the disk was formatted.
Copying data will take about two hours for a disk
with a capacity of 30 GB.

Follow the procedures described below to format the Hard

Disk in the unit.

1. Power up the Disk Recorder by pressing the 

switch.

2. The Disk Recorder will run through a series of instruc-

tions for the system on the Multiscreen Monitor.
The display as shown below appears on the monitor,
then the DISK MENU shown below will be displayed
after five seconds.

3. Move the cursor to FORMAT in the menu by pressing

the A or B button, then press the 

button.

The FORMAT MENU shown below appears on the mon-
itor screen.

4. Select the ALL password (5-digit) by pressing the

Numeric buttons 

.

Refer to the password setup in the SYSTEM SETUP
menu for further details.
The factory default setting is 12345.

• To select "0" for numeric input, press the numeric 10

button. 

• Entering an input will automatically check the pass-

word.
If the password is not correct, "PASSWORD
ERROR!" is displayed on the monitor screen and
the display returns to step 2.
To enter the password again, repeat procedures 3
and 4.

• To quit entering the password, press the 

button.

5. If the password is correct, the instructions shown below

appear in the lower-left corner of the menu.

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

B

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢

¢¢