Справочник Пользователя для Panasonic WJ-HD500A

46

●

This item lets you edit the group title to be displayed on the
monitor screen.
Each title is composed of 8 alphanumeric characters.

1. Move the cursor to TITLE in the COMMON SETUP menu

by pressing the D or C button, then press the 

but-

ton.
The GROUP SETUP (TITLE) menu as shown below
appears on the monitor screen.

2. Move the cursor to the group editing area to be edited

by pressing the D or C button.

3. Select a character by pressing the + or - button.

The characters shown below can be selected in
sequence.

0 1 2 3 4 5 6 7 8 9

A to Z, a to z

← →

= ? ' " # $ % & ( ) * + , – . / : ;

•

4. Press the B button to move the cursor to the right, then

select a character by pressing the + or - button.

5. Repeat the above steps 3 and 4 until all characters are

completed for the selected group title.
If a wrong character is selected, move the cursor to the
character to be replaced by pressing the A or  B but-
ton, then select a new character by pressing the + or
- button.

6. Repeat the above steps 2 to 5 to edit other group titles.

7. When satisfied with all the group titles, press the

button to return to the previous COMMON

SETUP menu.

Select this mode when the cameras are gen-

locked to the system.

Select this mode when asynchronous cameras

are used in the system.

The default setting is OFF.

Confirm camera synchronization in the system.

The incorrect setting will cause improper recording.

■

As described before, the Disk Recorder activates the
recording function of the assigned cameras in four groups
when the TIMER is set to INT (internal).
These items let you determine the camera’s group for
recording.

●

1. Move the cursor to CAMERA ASSIGNMENT in the

COMMON SETUP menu by pressing the D or  C but-
tons, then press the 

button.

The GROUP SETUP (CAMERA ASSIGNMENT) menu as
shown below appears on the monitor screen.

2. Move the cursor to the group editing area for the cam-

eras by pressing the A, B, D or C buttons.

3. Select a group number (

to 

) to be assigned by

pressing the + or - button.

The factory default setting is 1.

4. Repeat the above step 2 and 3 to assign the group

number for other cameras.

5. When all camera assignments are completed, press the

button to return to the previous COMMON

SETUP menu.