Справочник Пользователя для Q-See QS4474

CHAPTER 4  BASIC OPERA

TION

IMPORTANT! Date and time should be properly set before continuing so that 
you can easily locate recorded events. Inaccurate dates and times on files may 
affect their admissibility as evidence.

To set the date and time: 

STEP 1. Click DATE/TIME and configure 

the following options:

  • DATE: Enter the day, month, and year.
  • DATE FORMAT: Select DD/MM/YYYY, 

MM/DD/YYYY, or YYYY/MM/DD

  • TIME: Enter the time
  • TIME FORMAT: Use the drop-down 

menu and select 12 HOURS or 24 
HOURS

  • DST: Use the drop-down menu to 

select ON/OFF to enable/disable 
Daylight Savings Time

When you first startup your system, you are automatically logged in as the ADMIN under 
Device ID000000. By default, passwords are disabled on the system. You will not need a 
password to log in or access menus. You will not need a password to access your system 
using the browser-based remote software.
The system employs two levels of user authorities connected to a Device ID. The authorities 
are as follows:

• 

ADMIN (administrator): Has full control of the system, and can change both administrator 

and user passwords and enable/disable password checking

• 

USER (normal user): Only has access to live viewing, search, playback, and other limited 

authorities. 

For security reasons, it is highly recommended to enable passwords on your system. If you 
enable passwords, you must select a 6-digit ADMIN password and a 6-digit USER password.
The QS434 and QS464 only support one Admin and one User account.

  • ZONE: Select the correct time zone based on your current location. If you are uncertain 

of your time zone, you can find it at http://www.worldtimezone.com

STEP 2. Click MODIFY DATE AND TIME. Click CLOSE in the confirmation window.
STEP 3. Click APPLY. The new date and time are saved.

To set daylight savings time:

STEP 1. Under DST, select ON. DST options appear.
STEP 2. Under DST MODE select one of the following:
  • CUSTOM: Set customized start and end times for DST (go to step 4)
  • DEFAULT: The Default setting will apply DST from the second Sunday of March to the 

second Sunday in November (Go to step 3)

  • If using the DEFAULT, click APPLY.
  • If setting a CUSTOM DST, use the drop-down menus to select a week and month for 

the start and end times.

STEP 3. Click APPLY. Click CLOSE in the confirmation window.
STEP 4. Click EXIT in each menu until all windows are closed. Type date via numeric key.

You can change the Device ID and password 
of the ADMIN and the USER from the 
Password menu.

To open the 

Password/Security menu, click 

on Basic in the Main Menu and then select 
Password.
To change your Device ID and Password:

STEP 1. Click the field beside Device ID 

and enter a 6-digit numerical Device 
ID using the Virtual Keyboard. For 
example: changing the ID to 000010.

STEP 2. Under Password, select 

ENABLE.

STEP 3. Click the field beside Admin 

Password to enter a 6-digit 
numerical password using the Virtual 
Keyboard. Re-enter the password in 
the corresponding field.

STEP 4. Click the field beside User 

Password to enter a 6-digit 
numerical password using the Virtual 
Keyboard. Re-enter the password in 
the corresponding field.

STEP 5. Click Apply to save your 

changes. Click Close in the 
confirmation window.

STEP 6. Click Exit in each menu until all 

windows are closed.