Справочник Пользователя для Speco Technologies DVR-16/IP
6
3. Quick Installation Guide
The DVR-16/IP is equipped with a mobile rack, the HDD is hot-swappable. You can exchange
the HDD when the HDD is full. The following figures illustrate how to install HDD into the
removable cartridge.
the HDD when the HDD is full. The following figures illustrate how to install HDD into the
removable cartridge.
Step1:
Pull the active-handle outwards and unlock with the
miniature key provided (Figure 1).
Step2:
Pull the handle outwards till the carrier body is out of the
cartridge (Figure 1).
Step3:
Push the release latch to slide the top cover backwards
and remove it (Figure 1).
Step4:
Insert the DC power cable and IDE cable on the HDD.
Make sure the HDD is set to “Master” (Figure 2).
Step5:
Position the HDD into carrier body and slide the top
cover back to secure. Secure the HDD using the screws
provided (Figure 3).
provided (Figure 3).
Step6:
Slide the carrier body back in the cartridge frame and
lock it with the key provided. Then push the active-handle
inwards (Figure 4).
inwards (Figure 4).
<Figure 1>
<Figure 2>
<Figure 3>
<Figure 4>