Справочник Пользователя для Speco Technologies PC Pro Series

 

119 

In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to 
remove the selected alarm setting, click OK to exit and save the setting, Cancel to exit without 
saving, and Default to revert back to original factory setting. 

(1)

(2)

(3)

(4)

(5)

(6)

(7)

 

1. Click 

 to insert and set a new alarm setting. Click the items in the (7) Alarm Setting List, 

if you want to modify the alarm setting. 

2. In 

, display the selected alarm setting number 

in the list below. Enter alarm name and description. 

3. In 

, the number from 00 to 23 represent the time in 24-hour clock. Select the 

time and click the block you want to activate or deactivate the alarm function. When it is 
deactivated the color of the block turns white. 

4. In 

, you can set “Trigger if any” to activate if it falls to one of the conditions or 

“Trigger if all” to activate if it falls to all conditions. 

- 

In Camera section, select and click on the camera number (01 to 16) in Motion 
Detected

 and Video Loss to set the condition for the system to alarm. 

- In 

, click the camera number (01 to 16) and 

select the certain object on the screen (right click on camera number for detailed 
setting)), and when the certain object is missing or doubtful, the system will alarm. (see 
also 

Chapter 4.9.12

) In Scene Change, when the camera has been moved, the system 

will alarm, too. 

- In 

, click the camera number (01 to 16) to the system to alarm when 

detect the abnormal voice. 

5. In 

, select and click on the sensor number (use W and X to select the sensor) to 

set the condition for the system to alarm. If the sensor normal status is high, set the sensor 
condition to low (see 

Chapter 4.7 step #4 

). 

- Enable/disable 

the 

check box, to set the condition of the event for 

system to alarm. 

• 

 when the DVR system reboot without abnormal condition, the 

system will send out the alarm message. 

• 

 when the DVR system reboot in irregular condition, the system 

will send out the alarm message. 

• 

when the recording has been stopped, the system will