Справочник Пользователя для Speco Technologies PC Pro Series

 

66 

 

• 

 when the DVR system reboot without abnormal condition, the 

system will send out the alarm message. 

• 

 when the DVR system reboot in irregular condition, the system 

will send out the alarm message. 

• 

when the recording has been stopped, the system will 

send out the alarm message. 

• 

 when the network connection of DVR system is lost, the 

system will send out the alarm message. 

• 

 when the hard disk can’t work normally, the system will send out 

the alarm message. 

• 

 set a temperature limited of system for system to alarm. When DVR 

system temperature is over the temperature limited, the system will send out the 
alarm. 

• 

any objects move between selected regions which user has set up in 

 section (see 

Chapter 4.2.1

), the system will send out the alarm. 

Select the entry (object moves from region 1 to 2 or from region 2 to 1) and camera 
for system alarm detection. 

i

 

Only if camera has been setup in Object Counting will be available for 
selecting in Illegal Entry. 

- Enable/disable 

the 

 check box, to scan the data from the POS if it 

matches the keyword (see also 

Chapter 4.9.11

). 

- Enable/disable 

the 

 check box, to active with external alarm message 

by your own program. For the detail configuration, please contact the local reseller. 

6. In 

, click the camera number (01 to 16) to set the reset condition of alarm. 

Once alarm is reset, all alarm action will stop at the moment. If the sensor normal status is 
high, set the sensor condition to low. 

7. In 

, you may now set the alarm action for the system to perform when the alarm 

condition is activated. 

-  Launch EMAP 

Display mini EMAP screen. 

-  Call Monitor Out 

Switch to only display the video on Call Monitor from where the alarm is activated. 
a.  Select the camera from drop down list to specify which camera video to be