Листовка для Coleman 9805-230

– Insert one Pole Tip into the grommet on the 

webbing located at the corners of the tent (illus. 4).

– Go to opposite end of the same pole and 

gradually apply pressure to the pole, forming an 
arch, until you are able to insert the pole tip 
into the grommet 

– Attach the two Frame Clips at 

the mesh vent to the pole

– Repeat for second pole

1

2

– Layout and position tent with door facing 

desired direction. (illus. 1)

– For  best results in windy conditions, postion 

door or back of tent into the wind.

– Unzip door.
– Stake down tent corners. Keep the floor 

taut.(illus. 2)

– Assemble Frame Poles by interlocking the 

shock-corded sections. This will make two 
long poles. 

– Lay the poles out diagonally, centered on the 

tent.The center of the poles should cross 
forming an “X” in the middle of tent. (illus. 1)

– Fasten Toggle & Loop on top of tent over both 

poles. (illus. 1), (illus. 3)

Toggle & Loop

Tent stake

through Loop

Insert Pole Tip on

stake loop into pole.

illus. 5 Tent frame set-up

Toggle &

Loop

Frame Clips

aries

™

2

Part No. 9805-1101

Part No. 9805-1151