Справочник Пользователя для Motorola QIP2500 Series

19

TROUBLESHOOTING 

Reconnect the power cord. Be sure the QIP2500 is 
plugged into an outlet that is always live. 

The set-top may have received a software update and 
may not power on while the new software is being 
installed. Try again in a few minutes. 

Verify that the AC power cord is connected to the set-top 
and an AC outlet. Unplug the set-top from the AC outlet, 
plug it back in, and then press the 

 button. 

If the set-top is connected to a switched outlet on another 
unit, verify that that unit is powered on. Unplug the set-top 
from the AC outlet, plug it back in, and then press the 

 button. 

Press the 

 button on the set-top front panel instead 

of the remote control. The batteries in the remote control 
may be depleted. 

Press 

 on the remote control to ensure the remote 

control is in 

 mode. 

Be sure there are no obstructions between the remote 
control and the set-top. Aim the remote control directly at 
the set-top front panel, not the TV or VCR. 

Be sure that nothing is on the QIP2500 or blocking a clear 
line of sight between it and the remote control. 

Press and release operation keys one at a time, firmly and 
deliberately. 

Try changing channels using the buttons on the set-top 
front panel. 

Change the batteries in your remote.