Справочник Пользователя для Nokia 9828

GB 19

With the 0 button you can toggle between:

digital terrestrial TV
analogue terrestrial TV
video (the video must be switched on)

(This is only valid if the units are connected via SCART cables, and
not by a RF connection.)

Please note, that during the recording of a programme, every-
thing shown on the screen will be registered! For example, if you
call up a menu from the Mediamaster on the screen, the menu
will be recorded!

• Pressing the TEXT button will open a Teletext page (if Teletext

is transmitted.) Select teletext pages with the numeric buttons
on the remote control.

• You can also quickly step to the different page alternatives

shown in any page by pressing     .

• Press OK on a selected number to go to that page.

• Press EXIT, BACK or TEXT to return to TV mode.

• The 0 button will show the index page (normally page 100.)

   will show the next or previous teletext page.

• You can use the double arrow buttons to browse through the

pages you just have visited.

On most new TV sets you can use the TV’s remote control to
open and control the teletext functions while watching digital TV
channels. (The function is called VBI insertion.) NOTE: Also see
“Subtitles”settings on pages 26 and 27.

If you have a TV set with a 4:3 picture format, and the transmis-
sion is in 16:9, you can select Fullscreen or Letterbox to change
display format.

Fullscreen will fill up the screen vertically, but cut off some infor-
mation from the left and right sides of the picture.
Letterbox will give a complete picture, but leave black areas at
the top and bottom.

This button has double functions.

While watching TV: The TV/      function is used to switch from
TV to radio mode and vice versa.

When you have entered a menu, the EXIT function is used to
leave the menu at any time without changing anything.

Channel number

Analogue TV mode

Video mode. (The Video
must be switched ON)